F6 - Programmable Automation Controller
F6 is a Programmable Automation Controller (PAC). It combines the features and capabilities of a PC based control system with that of a typical PLC and motion control.
„High Performance – Low Power – Low Cost“ are the maxim of the F6 device family with ARM CPU.
The low power consumption of the CPU enables operation with passive cooling at extrem compact dimensions and low system cost.
The integrated IO bus allows the local or remote connection of F3 IO modules.
Each Module can be combined individually or multiples for any configuration need. The high integration allows the remote and the expanability of modules blocks, whether locally at the control unit, through the local bus or as a distributed I7O station.
The high integration allows the remote and the expanability of modules blocks, whether locally at the control unit, through the local bus or as a distributed I7O station.
The F6 base unit is programmed with CoDeSys in IEC-61131, as operating system Windows® CE is used.
Other operating systems are available on demand.
F6 PAC -Technical Information
|Technical Information||F6 - Controller|
|CPU||ARM processor: Texas Instruments AM3356-Sitara ARM Cortex - A8 Microprocessor|
|Memory||512 Mbytes DDR3 SDRAM|
|Storage||512 MB NAND Flash memory|
|Local & remote IOs||Digital: 16DI/16DO 0.5A, 4DI/4DO 2A, Analog: 2AO, 2AI, 2Pt100/3TC, max. 15 local IO modules|
|Dimension (HxDxW)||99mm x 114,5mm x 22,5mm|