AUTOMATA GmbH & Co. KG Gewerbering 5 D-86510 Ried
Phone: +49(0)8233 7916-0
Fax: +49(0)8233 7916-99

AUTOMATA S.p.A.• Via G. Carducci, 705 • I-21042  Caronno Pertusella (VA)
Phone: +39 (02)9639970FAX: +39 (02)

This site uses cookies to enable a better customer experience. By continuing to browse the site you are agreeing to our use of cookies.
Please find more information about cookies in our Data Privacy Statement.


follow us 


Injection Molding Machine Controller

OptinJect is all-in-one control system specially developed for the automation of plastic processing machines, e.g. injection molding machines.
All-in-one means that: I/Os, control, visualization, networking and expandability are already present in to the OptinJect system. ULV (Ultra Low Voltage) CPUs integrated with particular cooling system without fans, allow the system to operate in harsh environment condition.
OptinJect is also a modular I/Os Control System with an optional CAN bus or sercos III PCI board for standard  I/O connections.
The Analog Interrupt capability with threshold (Injection Speed to holding pressure switch) and 3 fast counter 32 Bits (Screw RPM and Mould Adjust position) are developed in particular for injection molding machine.
The programming suite for OptinJect units is CoDeSys by 3S and. This powerful development tool with all IEC 61131-3 functions, soft motion, visualization (WinMachLite) and all other necessary features does ensure efficient and comfortable programming, running together with embedded operating systems Windows®CE.NET.

Download manual 

Technical characteristics
KeyboardCustomizable104 Keys
 Customizable48 Led
Front Panel PortUSB1 x version 1.0
PortDVITransportations all signal form HMI to Control. (Power Supply, Video, Mouse, Keyboard, and all USB device) Max. 5 meters
 ResolutionUP to 800 x 600 SVGA
Touch Screen Resistive 5 wires (optional)
Mechanical specification
Mounting Front panel
DimensionHeight530 mm
 Width294 mm
 Depth37.7 mm
Weight 4.2 Kg
Cooling system Passive
Chassis Aluminum and steel
Technical characteristics
Geode TM LX800 500 MHz
 Intel®Celeron® M 600 MHz
System memoryDDRUp to 2GB
PortsSerial1 x RS232
 USB1 x version 2.0
 Ethernet1 x Intel® 10/100 Base-T
 DVITransportations all signal form HMI to Control. (Power Supply, Video, Mouse, Keyboard, and all USB device) Max. 5 meters
StorageCompact FlashUp to 1G Industrial grade
Expansion 1 x slot PCI
Power Supply 9 - 36 Vdc 120W
I/Os ConfigurationQ.ty
Digital Input4024V bipolar type 20Vdc Min. 34Vdc Max
Digital Output3224V sink or source type, 2A 20Vdc Min. 34Vdc Max.
Analog Input614 bits configurable by jumper 0-10V the channels 3 and 6 are configurable 0..20mA,
available for analog comparison interrupt
Analog Output60-10V (the channels 1 and 2 outputs configurable 0-10V or ±10V) 12 bits
Counter324V bipolar type, 3KHz
Thermocouple Input9J or K-type configurable on demand insulated or not, configurable by switch, form 0° to 500°C, 12 bits
Power Supply4power supply for transducers
Relay10230VAC 3A
Mechanical specification
Mounting Front cabinet
DimensionHeight399 mm
 Width341 mm
 Depth70 mm
Weight 6.1 Kg
Cooling system Passive with AMD LX800, fan with Celeron®
Chassis steel
Environmental characteristics
Operating Temperature0°C ÷ +50°C
Storage Temperature-20°C ÷ +70°C
Relative humidity90% n.c.
HMI ProtectionFront IP 65, Rear IP 40
Control ProtectionIP 20
Imprint|Data Privacy Polocy|Terms & Conditions
© Copyright 2021 CANNON-Automata